Mettler Toledo M300 FLOW Especificaciones descargar pdf (Pagina 24)

Transmitter O

M300 24

M300

Printed in Switzerland 52 121 305

6 Quick setup

(PATH: Menu/Quick Setup)

While in Measurement mode press the [MENU] key to bring up the Menu selection. Select

"Quick Setup" and press the [ENTER] key. The display prompts you to enter the Quick Setup

security code. Enter the Quick Setup security code to "xxxxx", then press the [ENTER] key to

conﬁrm the Quick Setup security code.

Convention:

line on display => a

line on display => b

line on display => c

line on display => d

Only lines a and b can be conﬁgured in Quick setup. Go to the Conﬁguration Menu to conﬁgure

lines c and d.

6.1 Channel selection

Select a or c to conﬁgure the values to be displayed. Please use the Conﬁguration menu to freely

conﬁgure the channels.

Example:

By selecting a and O

as unit, the O

value will be displayed on the 1

line. By selecting b and

as unit, the O

value will be displayed on the 3

line of the display.

By selecting a and °C as unit, the temperature will be displayed on the 1

line. By selecting b

and °C as unit, the temperature will be displayed on the 3

line.

6.2 Analog outputs

On the screen above, by selecting „Yes" the linear 4-20 mA analog output Aout1 will be setup

when [ENTER] is pressed. Selecting „No" means that no analog output is setup.

Aout1 min, Aout1 max are the minimum and maximum measurement values for the 4 and

20mA values respectively. To conﬁgure output 2, use the Conﬁguration Menu. Press [ENTER}.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Sin comentarios

Mettler Toledo M300 FLOW Especificaciones Pagina 24