Mettler Toledo M300 FLOW Especificaciones descargar pdf (Pagina 37)

Transmitter M300 FLOW 37

Printed in Switzerland 52 121 319

8.2.1 Set Averaging

Press [ENTER] to select this Menu. The averaging method (noise ﬁlter) for each measurement

can now be selected. The options are Special (Default), None, Low, Medium and High.

None = no averaging or ﬁltering

Low = equivalent to a 3 point moving average

Medium = equivalent to a 5 point moving average

High = equivalent to a 7 point moving average

Special = averaging depending on signal change (ideal for large changes in input signal).

Pressing the [ENTER] key will scroll through the remaining measurements.

Press[ENTER] to bring up the Save Changes dialog. Selecting No will discard the entered values

and return to the measurement display screen, selecting Yes will save changes made.

8.2.2 Set Pipe ID

Press [ENTER] key to select this Menu. This menu is used for ﬂow sensors where the inside

diameter of the pipe where the ﬂow sensor is installed, is needed to calculate an accurate ﬂow

velocity measurement.

Enter the inside diameter of the pipe. The value can be entered in (inches) or (cm).

Press [ENTER] to conﬁgure channels C and D of four channel transmitters.

Press [ENTER]to bring up the Save Changes dialog.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 69 70

Sin comentarios

Mettler Toledo M300 FLOW Especificaciones Pagina 37